english 
magyar
Galvanized polypropylen dielectric self regenerating starting condenser with relayed electric interrupter, for single phase asynchronous engines.
The tool ( condenser + interrupter ) connected paralell for the operating condenser, it is increasing the starting torque and the motor starting. The starting time is proportional with the required time, while the engine reaching the 80 % of the working speed. Then the condenser is turning off and discharching through a resistance.
Suitable for macines like: Compressors, valves, water cleaners, reductors, conveyor belts, and usually when the stopping time of the engine is short.
It cannot be used, if inertness is possible at shutting down, or the turning direction changes!
Engine voltage: 220 ÷240 V
Frequency: 50-60Hz
Capacity tolerance: ±5%
Working voltage:320V-480V
Suggested repeating time: 6 seconds
Maximum starting time: 6 minutes
Heat category: -25/85/21
Protection level: IP54
Protective housing and cap: suit the requierements of UL94 V2 level self releaser plastic.
Wire: 300mm-es PVC insulated 2x0,75 mmq H05V2v2-F type. Max 90°C temperature.